Bricklayer Insurance: What Australian Bricklayers Actually Need
You lay a feature brick wall for a client's front entrance. Two winters later, the mortar joints are crumbling and efflorescence is staining the face bricks. The client wants the wall pulled down and rebuilt — $12,000.
Bricklaying defects are slow to appear and expensive to fix. You can't patch a structural brick wall — you rebuild it. Insurance is what stops one failed mortar mix from costing you four months of profit.
Bricklayer insurance isn't one policy — it's a combination of covers designed for the specific risks bricklayers face on the job. Most bricklayers either don't have enough cover, or they're paying for policies they don't need. This guide breaks down what's required, what's recommended, what it costs in Australia, and where to get the best deal.
General information only. This page provides general information about trade insurance and does not constitute insurance or financial product advice. Cover, exclusions, licensing requirements, and premiums vary by provider, state, and work type. Always read the Product Disclosure Statement (PDS) and confirm requirements with a licensed broker or relevant state authority.
What Insurance Does a Bricklayer Need in Australia?
Public Liability Insurance
Required for virtually every bricklayer. Public liability covers you if a third party — a client, a neighbour, a member of the public — is injured or their property is damaged because of your work.
For bricklayers, the most common claims involve structural defects in walls and mortar/material failure. These claims can easily run into tens of thousands of dollars — and that's before legal costs.
Most bricklayers carry $5 million to $20 million in cover. If you're subcontracting on larger sites, the head contractor will often require $10 million or $20 million minimum — check your agreements before assuming $5 million is enough.
Typical cost: $600–$1,800/year depending on your revenue, number of employees, and claims history.
Tools & Equipment Insurance
The tool setup in this trade is usually worth more than most operators think once you add specialist gear, stock, and what lives in the vehicle every day. If that kit is stolen from the ute, trailer, or site, replacement cost hits immediately. Tools & Equipment insurance covers theft, accidental damage, and loss — from the van, from site, or in transit.
Typical cost: $300–$900/year depending on the total insured value.
Workers Compensation
Legally required if you employ anyone — including casual, part-time, or labour-hire staff. Workers comp is managed by state-based schemes (icare in NSW, WorkSafe in VIC, WorkCover in QLD) and covers your employees if they're injured at work.
As a sole trader with no employees, you don't legally need workers comp. But consider income protection instead — because you have no sick leave, no safety net, and one injury means zero income until you're back on the tools.
How Much Does Bricklayer Insurance Cost?
Here's what Australian bricklayers typically pay. These are real ranges based on current market rates — not theoretical figures.
| Insurance Type | Typical Annual Cost | Required? |
|---|---|---|
| Public Liability ($10M–$20M) | $600–$1,800 | Yes — virtually always |
| Tools & Equipment | $300–$900 | Recommended |
| Workers Compensation | Varies by state | Yes — if you employ anyone |
Total for a sole trader bricklayer: $1,000–$3,000/year.
Total for a bricklayer with 3–5 employees: $3,000–$8,000/year depending on payroll, state, and cover levels.
What affects the price? Your annual revenue, claims history, the type of bricklaying work you do, your state, and the number of employees. A clean claims record is the single best way to keep premiums down.
Best Bricklayer Insurance Providers in Australia
BizCover
Best for: Getting multiple quotes fast. Fill in one form, get quotes from multiple insurers in minutes. Quickest way to compare public liability and tools insurance without calling five brokers.
Not for: Complex multi-policy packages where you need a broker who understands bricklaying-specific risks in detail.
Why bricklayers use it: It is the fastest way to compare standard public liability and tools cover when you need a certificate of currency quickly.
Pros:
- Fast online quote process
- Good starting point to compare pricing
- Useful for standard public liability + tools bundles
Cons:
- Less helpful when wording around structural defects in walls really matters
- Limited hand-holding if the setup or claim is more complex
Trade Risk
Best for: Bricklayers who want a broker that actually understands trade businesses. Trade Risk specialises in insurance for Australian tradies — they know the difference between different types of bricklaying work and they'll tailor the package accordingly.
Not for: Bricklayers who just want the cheapest possible premium and don't need advice.
Why bricklayers use it: It is stronger when exclusions around structural defects in walls and mortar/material failure could matter at claim time.
Pros:
- Better for checking exclusions and limits before you buy
- More useful for higher-risk or non-standard work
- Broker support when clients require specific insurance wording
Cons:
- Slower than getting an instant online quote
- Usually overkill if you only want the cheapest basic policy today
What Does Bricklayer Public Liability Insurance Cover?
Bricklayer public liability insurance covers claims made by third parties for bodily injury or property damage caused by your bricklaying work.
What's covered:
- Structural defects in walls
- Mortar/material failure
- Working at heights
- Injury to a member of the public caused by your work or your equipment
- Legal defence costs if a claim is made against you
What's typically NOT covered:
- Defective workmanship itself (the cost to redo faulty work is on you)
- Damage to your own property, tools, or equipment (that's tools insurance)
- Injuries to your own employees (that's workers compensation)
- Intentional damage or work you knew was defective
Common Risks for Australian Bricklayers
Every trade has its own risk profile. Bricklayers face specific risks that make insurance non-negotiable.
Structural defects in walls. If something structural fails after completion, the client usually treats it as proof the original work was defective from day one.
Mortar/material failure. Mortar/material failure can turn a normal bricklaying work job into a claim for repairs, delays, and legal costs. The financial exposure is usually much bigger than the margin on the work that caused it.
Working at heights. Working at heights can turn a normal bricklaying work job into a claim for repairs, delays, and legal costs. The financial exposure is usually much bigger than the margin on the work that caused it.
Property damage from falling materials. Property damage claims are expensive because the loss usually extends beyond the item you touched into surrounding finishes, cleanup, and delay costs.
Foundation cracking. Foundation cracking can turn a normal bricklaying work job into a claim for repairs, delays, and legal costs. The financial exposure is usually much bigger than the margin on the work that caused it.
Frequently Asked Questions
At minimum, most Australian bricklayers need public liability insurance, and many should also carry tools cover. From there the right mix depends on whether you employ staff, give advice, or work in higher-risk environments.
Public liability for Australian bricklayers typically starts around $600–$1,800 depending on turnover, claims history, and the risk profile of the work. Higher limits and higher-risk jobs push the premium up.
If you employ anyone, workers compensation is generally mandatory through the state-based scheme where your business operates. Sole traders without employees usually do not need it, but that does not remove the need for public liability or income protection.
Tools cover is there for theft, accidental damage, and loss of the gear you rely on to do the job. The practical test is simple: could you afford to replace the whole setup this week if the vehicle was cleaned out?
Get bricklayer cover sorted before the next job turns into a claim.
BizCover is the fastest way to compare bricklayer insurance quotes online. If your work is more complex or the exclusions matter, get a broker review from Trade Risk before you lock anything in.
Compare Quotes →